Product Description
Transformers in this series are suitable for use in AC circuits with a frequency of 50 - 60Hz and are commonly used as power sources for portable lamps.
DJMB2, JMB, and DG Series
Supply Capability
| Qty | Shipping Time |
| 1 - 1Plant | 5 days |
| > 1 Plant | Need to negotiate |
Product descriptions
Normal working conditions and installation conditions
1. The altitude does not exceed 2000m.
2. Ambient air temperature:
The upper limit of the ambient air temperature does not exceed +40°C;
The average value of the ambient air temperature over 24 hours does not exceed +35°C;
The lower limit of the ambient air temperature is not lower than -5°C.
3. The relative air humidity is not more than 90%.
4. The ambient air does not contain gases or dust that corrode metals and damage insulation.
5. During use, prevent bumping and severe vibration, and prevent erosion from water, rain, and snow.
6. The power supply voltage waveform is approximately a sine wave.
Structural features
This series of transformers consists of BK series transformers and protective enclosures. There are terminal posts on both sides for input power supply and load wiring, and there are grounding screws for grounding. The BZ type lighting transformer consists of BK - 50VA, BK - 100VA control transformers, LS3 - 2 type master switch, and protective enclosure. A fuse is installed on the master switch to protect the lighting circuit. The power supply is introduced from the dust - proof film section where the master switch is installed, and the lighting is connected and disconnected through the master switch.